POINT OF USE MIXING VALVES

Leonard’s valve models give plumbing engineers “integrated control” for water tempering design and installation needs, and offer efficient response time to temperature and pressure fluctuations, ensuring optimal temperature control and performance for domestic hot water systems. These valves provide accurately mixed water from extremely low flows of 0.25 GPM (.95 lpm) to 5 GPM (18.9 lpm)



170A-LF
Exposed Point of Use Mixing Valve


The Model 170A-LF is a high performance temperature limiting device used to supply single outlets. Can be used to supply one sensor faucet or one two handle manual faucet. 

Certified to ASSE 1070 to control down to 0.25 GPM  
Eco-Mix Certified Lead-Free* construction  
Integral inlet checks and stainless steel screens  
Includes locknut to prevent accidental adjustment  
Easy 3/8” tubing or flex hose installation


MODEL 170-LF
Exposed Point of Use Mixing Valve

Lead Free body  Locked temperature adjustment cap (vandal  resistant)  
Copper encapsulated thermostat assembly with polymer thermoplastic shuttle Stainless steel springs Integral check valves on hot and cold inlets Compression fittings on inlets and outlet PRESSURE-TEMPERATURE: Maximum Hot Water temperature: 200°F- (93°C) Approach Temperature 5°F (2.8°C) above set point.


MODEL 270-LF EXPOSED POINT OF USE MIXING VALVE

ECO-MIX ™ Lead Free Bronze body Locked temperature adjustment cap (vandal resistant) Copper encapsulated thermostat assembly with polymer  
thermoplastic shuttle Stainless steel springs Buna-N: O’rings 
Integral check valves on hot and cold inlets 
PRESSURE-TEMPERATURE: 
Minimum Flow:0.25 GPM (0.95 l/Min) 
Maximum Pressure:125 PSI (8.6 BAR) 
Maximum Hot Water temperature: 200°F- (93°C) 
Approach Temperature 5°F(2.8°C) above set 
point. 


MODEL 370-LF EXPOSED POINT OF MIXING VALVE

ECO-MIX ™ Lead Free Bronze body  Locked temperature adjustment cap (vandal resistant) Copper encapsulated thermostat assembly with polymer thermoplastic shuttle Stainless steel springs Buna-N: O’rings, Integral check valves on hot and cold inlets  
PRESSURE-TEMPERATURE:  
Minimum Flow:0.5 GPM (1.9 l/Min)  
Maximum Pressure:125 PSI (8.6 BAR)  
Maximum Hot Water temperature: 200°F- (93°C), Approach Temperature 5°F(2.8°C) above set point.  


MODEL XL-670-LF-DT
Master Point of Use Mixing Valve

High Low Thermostatic Water Mixing Valve with 2.5 GPM (9.5 l/min) minimum flow capacity, 1” inlets, 1-1/4” outlet (25mm x 32 mm), Integral combination check-stops with strainers and wall support, 125 PSI (8.6 BAR) maximum operating pressure. Copper encapsulated thermostatic element assemblies with Teflon coated shuttle Locking temperature regulating handle set for 120°F(49°C), Internal parts of stainless steel, Rough bronze finish